The Double Disc™ pump combines the performance features of a positive displacement pump and the principle of “Induced Flow” to provide superior versatility in fluids handling. Based on a “Free Diaphragm” technology, the pump utilizes a unique principle of operation where the discs perform the duties of both diaphragm and valve, providing a double acting, non-clogging, pumping action. Through an arrangement of connecting rods and a camshaft, a reciprocating action of the discs is created, forming a large cavity between the discs. This cavity is filled and exhausted in a continuous flow. The large valve-like discs mean that solids and rags can be handled without loss of pumping action. The valve-like discs have large seating areas that provide for low internal velocities, extending the pump wear life on abrasive sludges and slurries. The fluid chamber is sealed with flexible trunnions which eliminates packings, mechanical seals, and requires no flushing water or other forms of lubrication. The large diameter discs are proven to handle large solids, rags, plastics, etc., that would cause other pumps to fail.
|
|
|
| Suction Cycle |
Discharge Cycle |
| The suction disc (right) is lifted from it's seat creating a vacuum.
The cavity between the discs is filled during the reciprocating motion
of the suction disc. The discharge disc (left) is seated. |
The reciprocating action then causes the
suction disk (right) to seat and create a seal in the flow path
and a downward motion of the discharge disc (left) forces the
discharge. |
|
